Small height elevators

Platform designed to overcome architectural barriers by means of its vertical displacement, allowing a maximum unevenness of up to 3000mm, with a maximum nominal load of 300kg.

Technical characteristics

  • Load capacity: 300 Kg.
  • Nominal speed 0,10 m/s.
  • Maximum travel 3,000 mm 1:1 ratio.
  • Two stops.
  • Hydraulic impulsion system by means of a synchronized telescopic cylinder with direct thrust.
  • Hydraulic unit with solenoid valve for progressive start and stop and manual lowering valve.
  • Hydraulic silencer (inside the unit) to reduce the transmission of noise and vibrations to the structure.
  • Pre-assembled 24 VDC electric manoeuvre, with constant pulsation. The device will only work when the button is pressed.
  • Electrical panel and hydraulic unit integrated in the same cabinet.
  • Horizontal pushbutton panel in the passenger compartment fitted with a key (cabin pushbutton validation) which lights up when activated, mushroom type stop pushbutton and up and down pushbuttons which light up when they are actuated.
  • Stainless steel floor-standing push-buttons.
  • Standard platform dimensions 1250 x 950 mm (other dimensions on request).
  • Standard pit of 150 mm.
  • Possibility of up to 3 shipments.
  • Automatic re-levelling: the equipment recovers the level of the plant, in the upper stops, when the platform descends, for reasons beyond the usual operation.
  • Three-phase electric motor 1 CV (750 W).
  • Non-slip floor (black button rubber).
  • Lateral protections in laminated glass, thickness 3+3, of 1200 mm of
  • Tubular handrail in polished stainless steel.
  • Guides closed in sheet metal.
  • Anti-crushing device under the platform.
  • Finished in RAL 7035 and RAL 9005 combined.
  • Emergency rescuer in descent and 12v by cut of electrical fluid.

Options

  • Single-phase electric motor 1.5 hp (1.1 kW).
  • Protective bellows under the platform.
  • Automation of doors, both semi-automatic and semi-doors (1200 mm height).
  • Remote control: to carry out the same functions as from the platform or plant pushbuttons (at constant pressure).
  • Non-slip aluminium platform floor.
  • Blind sheet finish on the sides of the passenger compartment.
  • Photocells or immaterial barrier in shipments without cabin doors.
  • Overload pressure switch with luminous in cabin console.
  • Alarm button in cabin console.
  • Keys in substitution of the pushbuttons (restricted use).
  • Pre-wired to cabin for the installation of bidirectional communicator.
  • Other platform dimensions on request.
  • Polished stainless steel finish.
  • Weatherproof preparation. Other finishes (consult).